.\" Copyright (c) 1989, 1990, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\"    must display the following acknowledgement:
.\"	This product includes software developed by the University of
.\"	California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)hexdump.1	8.2 (Berkeley) 4/18/94
.\"
.TH HEXDUMP "1" "April 2013" "util-linux" "User Commands"
.SH NAME
hexdump \- display file contents in hexadecimal, decimal, octal, or ascii
.SH SYNOPSIS
.B hexdump
.RI [options] " file" ...
.SH DESCRIPTION
The
.B hexdump
utility is a filter which displays the specified files, or
standard input if no files are specified, in a user-specified
format.
.SH OPTIONS
Below, the \fIlength\fR and \fIoffset\fR arguments may be followed by the multiplicative
suffixes KiB (=1024), MiB (=1024*1024), and so on for GiB, TiB, PiB, EiB, ZiB and YiB
(the "iB" is optional, e.g. "K" has the same meaning as "KiB"), or the suffixes
KB (=1000), MB (=1000*1000), and so on for GB, TB, PB, EB, ZB and YB.
.TP
\fB\-b\fR, \fB\-\-one\-byte\-octal\fR
\fIOne-byte octal display\fR.  Display the input offset in hexadecimal,
followed by sixteen space-separated, three-column, zero-filled bytes of input
data, in octal, per line.
.TP
\fB\-c\fR, \fB\-\-one\-byte\-char\fR
\fIOne-byte character display\fR.  Display the input offset in hexadecimal,
followed by sixteen space-separated, three-column, space-filled characters of
input data per line.
.TP
\fB\-C\fR, \fB\-\-canonical\fR
\fICanonical hex+ASCII display\fR.  Display the input offset in hexadecimal,
followed by sixteen space-separated, two-column, hexadecimal bytes, followed
by the same sixteen bytes in
.B %_p
format enclosed in
.RB ' | '
characters.
.TP
\fB\-d\fR, \fB\-\-two\-bytes\-decimal\fR
\fITwo-byte decimal display\fR.  Display the input offset in hexadecimal,
followed by eight space-separated, five-column, zero-filled, two-byte units
of input data, in unsigned decimal, per line.
.TP
\fB\-e\fR, \fB\-\-format\fR \fIformat_string\fR
Specify a format string to be used for displaying data.
.TP
\fB\-f\fR, \fB\-\-format\-file\fR \fIfile\fR
Specify a file that contains one or more newline-separated format strings.
Empty lines and lines whose first non-blank character is a hash mark (\&#)
are ignored.
.TP
\fB\-L\fR, \fB\-\-color\fR[=\fIwhen\fR]
Accept color units for the output.  The optional argument \fIwhen\fP
can be \fBauto\fR, \fBnever\fR or \fBalways\fR.  If the \fIwhen\fR argument is omitted,
it defaults to \fBauto\fR.  The colors can be disabled; for the current built-in default
see the \fB\-\-help\fR output.  See also the \fBColors\fR subsection and
the \fBCOLORS\fR section below.
.TP
\fB\-n\fR, \fB\-\-length\fR \fIlength\fR
Interpret only
.I length
bytes of input.
.TP
\fB\-o\fR, \fB\-\-two\-bytes\-octal\fR
\fITwo-byte octal display\fR.  Display the input offset in hexadecimal,
followed by eight space-separated, six-column, zero-filled, two-byte
quantities of input data, in octal, per line.
.TP
\fB\-s\fR, \fB\-\-skip\fR \fIoffset\fR
Skip
.I offset
bytes from the beginning of the input.
.TP
\fB\-v\fR, \fB\-\-no\-squeezing\fR
The
.B \-v
option causes
.B hexdump
to display all input data.  Without the
.B \-v
option, any number of groups of output lines which would be identical to the
immediately preceding group of output lines (except for the input offsets),
are replaced with a line comprised of a single asterisk.
.TP
\fB\-x\fR, \fB\-\-two\-bytes\-hex\fR
\fITwo-byte hexadecimal display\fR.  Display the input offset in hexadecimal,
followed by eight space-separated, four-column, zero-filled, two-byte
quantities of input data, in hexadecimal, per line.
.TP
.BR \-V , " \-\-version"
Display version information and exit.
.TP
.BR \-h , " \-\-help"
Display help text and exit.
.PP
For each input file,
.B hexdump
sequentially copies the input to standard output, transforming the data
according to the format strings specified by the
.B \-e
and
.B \-f
options, in the order that they were specified.
.SH FORMATS
A format string contains any number of format units, separated by whitespace.
A format unit contains up to three items: an iteration count, a byte count,
and a format.
.PP
The iteration count is an optional positive integer, which defaults to one.
Each format is applied iteration count times.
.PP
The byte count is an optional positive integer.  If specified it defines the
number of bytes to be interpreted by each iteration of the format.
.PP
If an iteration count and/or a byte count is specified, a single slash must
be placed after the iteration count and/or before the byte count to
disambiguate them.  Any whitespace before or after the slash is ignored.
.PP
The format is required and must be surrounded by double quote (" ") marks.
It is interpreted as a fprintf-style format string (see
.BR fprintf (3),
with the following exceptions:
.TP
1.
An asterisk (*) may not be used as a field width or precision.
.TP
2.
A byte count or field precision
.I is
required for each
.B s
conversion character (unlike the
.BR fprintf (3)
default which prints the entire string if the precision is unspecified).
.TP
3.
The conversion characters
.BR h , \ l , \ n , \ p ,
.RB  and \ q
are not supported.
.TP
4.
The single character escape sequences described in the C standard are
supported:
.PP
.RS 13
.PD 0
.TP 21
NULL
\e0
.TP
<alert character>
\ea
.TP
<backspace>
\eb
.TP
<form-feed>
\ef
.TP
<newline>
\en
.TP
<carriage return>
\er
.TP
<tab>
\et
.TP
<vertical tab>
\ev
.PD
.RE
.PP
.SS Conversion strings
The
.B hexdump
utility also supports the following additional conversion strings.
.TP
.B \&_a[dox]
Display the input offset, cumulative across input files, of the next byte to
be displayed.  The appended characters
.BR d ,
.BR o ,
and
.B x
specify the display base as decimal, octal or hexadecimal respectively.
.TP
.B \&_A[dox]
Identical to the
.B \&_a
conversion string except that it is only performed once, when all of the
input data has been processed.
.TP
.B \&_c
Output characters in the default character set.  Non-printing characters are
displayed in three-character, zero-padded octal, except for those
representable by standard escape notation (see above), which are displayed as
two-character strings.
.TP
.B \&_p
Output characters in the default character set.  Non-printing characters are
displayed as a single
.RB ' \&. '.
.TP
.B \&_u
Output US ASCII characters, with the exception that control characters are
displayed using the following, lower-case, names.  Characters greater than
0xff, hexadecimal, are displayed as hexadecimal strings.
.RS 10
.TS
tab(|);
left l l l l l.
000 nul|001 soh|002 stx|003 etx|004 eot|005 enq
006 ack|007 bel|008 bs|009 ht|00A lf|00B vt
00C ff|00D cr|00E so|00F si|010 dle|011 dc1
012 dc2|013 dc3|014 dc4|015 nak|016 syn|017 etb
018 can|019 em|01A sub|01B esc|01C fs|01D gs
01E rs|01F us|0FF del
.TE
.SS Colors
When put at the end of a format specifier, hexdump highlights the
respective string with the color specified.  Conditions, if present, are
evaluated prior to highlighting.
.PP
.B \&_L[color_unit_1,\:color_unit_2,\:...,\:color_unit_n]
.PP
The full syntax of a color unit is as follows:
.PP
.B [!]COLOR\:[:VALUE]\:[@OFFSET_START[-END]]
.TP
.B !
Negate the condition.  Please note that it only makes sense to negate a
unit if both a value/\:string and an offset are specified.  In that case
the respective output string will be highlighted if and only if the
value/\:string does not match the one at the offset.
.TP
.BR COLOR
One of the 8 basic shell colors.
.TP
.B VALUE
A value to be matched specified in hexadecimal, or octal base, or as a
string.  Please note that the usual C escape sequences are not
interpreted by hexdump inside the color_units.
.TP
.B OFFSET
An offset or an offset range at which to check for a match.  Please note
that lone OFFSET_START uses the same value as END offset.
.SS Counters
The default and supported byte counts for the conversion characters
are as follows:
.TP
.BR \&%_c , \ \&%_p , \ \&%_u , \ \&%c
One byte counts only.
.TP
.BR \&%d , \ \&%i , \ \&%o , \ \&%u , \ \&%X , \ \&%x
Four byte default, one, two and four byte counts supported.
.TP
.BR \&%E , \ \&%e , \ \&%f , \ \&%G , \ \&%g
Eight byte default, four byte counts supported.
.PP
The amount of data interpreted by each format string is the sum of the data
required by each format unit, which is the iteration count times the byte
count, or the iteration count times the number of bytes required by the
format if the byte count is not specified.
.PP
The input is manipulated in
.IR blocks ,
where a block is defined as the largest amount of data specified by any
format string.  Format strings interpreting less than an input block's worth
of data, whose last format unit both interprets some number of bytes and does
not have a specified iteration count, have the iteration count incremented
until the entire input block has been processed or there is not enough data
remaining in the block to satisfy the format string.
.PP
If, either as a result of user specification or
.B hexdump
modifying the iteration count as described above, an iteration count is
greater than one, no trailing whitespace characters are output during the
last iteration.
.PP
It is an error to specify a byte count as well as multiple conversion
characters or strings unless all but one of the conversion characters or
strings is
.B \&_a
or
.BR \&_A .
.PP
If, as a result of the specification of the
.B \-n
option or end-of-file being reached, input data only partially satisfies a
format string, the input block is zero-padded sufficiently to display all
available data (i.e. any format units overlapping the end of data will
display some number of the zero bytes).
.PP
Further output by such format strings is replaced by an equivalent number of
spaces.  An equivalent number of spaces is defined as the number of spaces
output by an
.B s
conversion character with the same field width and precision as the original
conversion character or conversion string but with any
.RB ' \&+ ',
\' \',
.RB ' \&# '
conversion flag characters removed, and referencing a NULL string.
.PP
If no format strings are specified, the default display is very similar to
the \fB\-x\fR output format (the \fB\-x\fR option causes more space to be
used between format units than in the default output).
.SH "EXIT STATUS"
.B hexdump
exits 0 on success and >0 if an error occurred.
.SH EXAMPLES
Display the input in perusal format:
.nf
   "%06.6_ao "  12/1 "%3_u "
   "\et\et" "%_p "
   "\en"
.nf
.PP
Implement the \-x option:
.nf
   "%07.7_Ax\en"
   "%07.7_ax  " 8/2 "%04x " "\en"
.nf
.PP
MBR Boot Signature example: Highlight the addresses cyan and the bytes at
offsets 510 and 511 green if their value is 0xAA55, red otherwise.
.nf
   "%07.7_Ax_L[cyan]\en"
   "%07.7_ax_L[cyan]  " 8/2 "   %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\en"
.nf
.SH COLORS
Implicit coloring can be disabled by an empty file \fI/etc/terminal-colors.d/hexdump.disable\fR.

See
.BR terminal-colors.d (5)
for more details about colorization configuration.
.SH STANDARDS
The
.B hexdump
utility is expected to be IEEE Std 1003.2 ("POSIX.2") compatible.
.SH AVAILABILITY
The hexdump command is part of the util-linux package and is available from
.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
Linux Kernel Archive
.UE .
